09 Apr Rack for Stanley Small Part Boxes

Posted at 17:15h in DIY Projects by

I build this little rack for all my Stanley boxes. The spacer I use in the video is 20mm x 40mm, the small one keeps the rails 5mm from the edge.


I got the inspiration from Wesley Treat. You can find his version here: https://www.youtube.com/watch?v=0–7CZCVngM

Parts used:

Cut List:
18mm (3/4 inch) plywood
3x 460mm x 352mm (top, bottom and side table)
2x 930mm x 340mm (sides)

12mm – (1/2 inch) plywood

1x 930mm x 460mm (back)

32x 330mm Lattice Moulding (rails)

https://www.homedepot.com/p/Woodgrain-Millwork-LWM-266-1-4-in-x-1-1-2-in-Primed-Finger-Jointed-Lattice-Moulding-10001884/203461891

BUILD TIME

Build: 4-6h

COST

~ 60-100 USD

Tags:
, , , , , , , , , , , , , , , , , , , , ,
No Comments

Sorry, the comment form is closed at this time.